8-Wire, 4-Circuit, Compatible Wire Harness, 36-Inch for Ethospace Furniture8 Wire, 4 Circuit. 3+1 system for Current version OEM Power
36" power harness for 24" Panel
Fits post 1992 power in Ethospace products.
PLEASE NOTE: These products are a compatible aftermarket product that is produced in our own plants and is neither endorsed or recognized by the original manufacturer. These parts do not originate from the OEM.
Ethospace� is a trademark of Herman Miller�, these parts are not authorized but are aftermarket replacement parts that fit the application, use of trademarked names is exclusively to use for reference purposes only.
- Version 2 power for Ethospace panel
For 36" wide finished panel
4 circuit (3+1, 3 shared, 1 dedicated)
Includes attached jumper for panel to panel or connector application.
Jumper is flexible and requires slight bending in field to allow connections.
Compatible with current version OEM power system (post 1992 "E" series)
Nominal width is 36"
Part mounts to frame with #6 or #8 x 3/4" screws (not included). You need a 6" long Phillips bit to install this on a panel in the field with the raceway already installed. It is recommended you use quality bits and screws for this application.
Note: This part is an aftermarket part. We are not affiliated with the original manufacture, registered and trademark names are for identification of purpose only, these parts originate from aftermarket manufacturing sources.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
Compatico® is a registered trademark of Compatico, Inc.
Friant® is a registered trademark of Friant Inc.
Open Plan Systems® and HMU® are registered trademarks of Open Plan Systems, Inc.
Unisource, Mirage® and Mirage VS® are registered trademarks of Unisource Office Furniture Parts, Inc.
All parts and products listed on this website originate from aftermarket manufacturers. Any reference to a specific manufacturer or trademark is only for the purposes of identify application for the part. No parts sold on this website originate from the original manufacturer.