8-Wire, 4-Curcuit, Version 1 Cubicle Power Harness, 30-Inch, AO2Power pack for Version 1 AO2 Power
8 Wire, 4 Circuit. 3+1 system for Version 1 OEM Power
30" power harness for 30" Panel
Fits pre 1992 power in AO2®, SQA® and many similar products.
PLEASE NOTE: These products are a compatible aftermarket product that is produced in our own plants and is neither endorsed or recognized by the original manufacturer. These parts do not originate from the OEM.
- Version 2 power for AO2 panel
For 30" wide finished panel
4 circuit (3+1, 3 shared, 1 dedicated)
- Many Clone Systems
- AO2 pre 92
- Phoenix Design AO2 pre 92
- SQA AO2 pre 92
Requires a festoon jumper for panel to panel or panel to connector applications. Sold Separately
Compatible with pre 1992 and version 1 clone power system (pre 1992 "D" series)
Nominal width is 30"
Part mounts to panel metal base with #6 or #8 x 3/4" screws (not included). You need a 6" long Phillips bit to install this on a panel in the field with the raceway already installed. It is recommended you use quality bits and screws for this application.
Note: This part is an aftermarket part. We are not affiliated with the original manufacture, registered and trademark names are for identification of purpose only, these parts originate from aftermarket manufacturing sources.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
Compatico® is a registered trademark of Compatico, Inc.
Friant® is a registered trademark of Friant Inc.
Open Plan Systems® and HMU® are registered trademarks of Open Plan Systems, Inc.
Unisource, Mirage® and Mirage VS® are registered trademarks of Unisource Office Furniture Parts, Inc.
All parts and products listed on this website originate from aftermarket manufacturers. Any reference to a specific manufacturer or trademark is only for the purposes of identify application for the part. No parts sold on this website originate from the original manufacturer.