Panel Door Frame, Metal
Metal Door Frame Assembly for A02 panels
85"h x 48"w
Includes Frame, Plexiglass, Hinges, Raceway covers and trim
Welded Metal Frame
Finish Color: BU Black Umber
NOTE: DOES NOT INCLUDE DOOR CORE
NOTE: This product must ship LTL truck carrier, please contact us for shipping cost
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov
Door Core Detail (Please note, door cores are not included with this product.
This information is to allow for local production on the door core. Please contact us with questions.
Door Core Size Requirements.
- Overall net width of core 36 5/16"
- Overall net length of core 82 1/4"
- Overall net finished thickness 1 3/8"
- Hinge locations:
- Top Hinge 7" from top of door core
- Bottom Hinge 7" from bottom of door core.
- Hinge depth .011"
- Hinge Mortise width 3 17/32"
- Hinge Width 3.5"
- Hinge mounting holes 3 (2 1/8" on center)
- Swing, both directions Mortise to allow hinge to mount either direction.
- Latch Location 41 1/8" on center. For lock assembly.Choose best option for local use, please be aware of local codes for lock and knob assembly.
Door core should be light weight honeycomb center.
-
Door Core Detail (Please note, door cores are not included with this product.
This information is to allow for local production on the door core. Please contact us with questions.
Door Core Size Requirements.- Overall net width of core 36 5/16"
- Overall net length of core 82 1/4"
- Overall net finished thickness 1 3/8"
- Hinge locations:
- Top Hinge 7" from top of door core
- Bottom Hinge 7" from bottom of door core.
- Hinge depth .011"
- Hinge Mortise width 3 17/32"
- Hinge Width 3.5"
- Hinge mounting holes 3 (2 1/8" on center)
- Swing, both directions Mortise to allow hinge to mount either direction.
- Latch Location 41 1/8" on center. For lock assembly.Choose best option for local use, please be aware of local codes for lock and knob assembly.
Door core should be light weight honeycomb center.
Specifications:
Metal Welded frame, assembled with side rails, top cap, hings, door jam (aluminum), clear plexiglass with glazing.
NOTE: DOES NOT INCLUDE DOOR CORE (Field supplied only)
85" h x 48" w x 1 7/8" d
Includes:
Fully welded door frame, powder coated to finish spec.
2 80" one piece complex hanger frame on each side (installed)
2 3 1/2" hinges installed (zinc finish)
1 plexiglass window with glazing trim installed
1 threshold, adjustable
1 set door jam in buffed aluminum finish.
1 top cap
1 AO2 metal raceway with glides
2 AO2 non power raceway cover
1 Raceway end trim cap for door with mounting screws.
NOTE: DOES NOT INCLUDE DOOR CORE, field supplied.
PLEASE NOTE, THIS PRODUCT MUST SHIP MOTOR FREIGHT ONLY. Freight quotes will be supplied in advance of shipping for this item.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
