62"H X 30"W Hard Surface Cubicle Panel Core Blank for AO1 and AO2Panel Blank (Core)
Raw, panel core for use with A01 or A02 panels
62"h x 30"w
Ready for fabric application and assembly.
Honeycomb construction, hollow core with mounting slots for top cap and pre drill for wedge block and base/glides.
This is a raw panel core sized and designed for use with A01 and A02 style panel assemblies.
This product requires, top cap, hanger frame, base components, fabric, mounting hardware, raceway covers and power (if required). All sold separately and are not included with this item.
Product is sized one inch under nominal size to fit standard OEM style A01 or A02 hardware.
Actual size is 61"h x 29"w.
Construction is honeycomb core design.
OSB side, top and bottom rails
MDF face and honeycomb interior
Pre bored for wedge blocks if needed.
Works with original (pre 1990's) multiple piece hanger frame, wedge block and panel shell or current version one piece hanger frame and rail.
Top is pre-slotted for use with plastic or metal top cap.
Bottom is bored for mounting t nut (A01) or Metal Base (A02) assembly.
Designed to be fabric covered (not included).
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.