Top Mounted Power Triplex module 1 USB A 1 USB C

For insert into Desk or Table Top

Fits flush (plus upper trim face) to Table or Desk Tops

Requires a 10" x 4 11/16" hole to be cut into top (see drawing)

Has 14-gauge molded plug wire (black)

3 15 amp duplex outlets and 1 USB A and 1 USB C Ports

Face finish is brushed aluminum with tilt up lid

• Specifications:
  
  Top Insert top power module for Desk, Conference or Training tables
  
  Triplex Power Module for desktops brushed aluminum trim with flip up lid
  
  Includes USB A and C ports for charging. 5 VDC 3 Amp 15W
  
  14-gauge cord.3 prong with ground.
  
  Aluminum face with Black finish with black cord.
  
  Fits:
  Tops 1" or thicker
  Opening cut is 10" x 4 11/6" (using a 1/4" router or jig saw)
  
  • Desking
  • Benching
  • Cubicles
  • Worksurfaces (1" thick or mores)
  
  Module face is:
  Aluminum with tilt up lip (retracable)
  10 7/16" (265.3mm) x 5 5/64" (129mm)
  
  Insert is:
  Steel, Black Finish
  
  9 57/64" (251.4mm) long
  4 9/16" (116mm) wide
  6 25/32" (172.2mm) deep
  
  Cut open require is 10" (254mm) x 4 11/16" (119mm) using a 1/4" diameter router bit.
  
  Two screw locations 15/32" down from top surface for locking into the side of the top core.
  
  60" cord black molded 3 prong 14 gauge.
  
  UL
  
  
  
  
  

The trademarks, service marks or registered trademarks are those of their respective owners.

The parts on this site are made by or for OmniMax USA LLC.

OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.

These parts do not originate from the original OEM manufactures unless specifically identified as such.

Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.

Compatico® is a registered trademark of Compatico, Inc.

Friant® is a registered trademark of Friant Inc.

Open Plan Systems® and HMU® are registered trademarks of Open Plan Systems, Inc.

Unisource, Mirage® and Mirage VS® are registered trademarks of Unisource Office Furniture Parts, Inc.

All parts and products listed on this website originate from aftermarket manufacturers. Any reference to a specific manufacturer or trademark is only for the purposes of identify application for the part. No parts sold on this website originate from the original manufacturer.