Top Mounted Power Duplex module 2 USB

For insert into Desk or Table Top

Fits flush (plus upper trim face) to Table or Desk Tops

Requires a 5 5/16" x 1 15/16" hole to be cut into top (see drawing)

Has 14-gauge molded plug wire (black)

2 duplex outlets and 2 USB A Ports. 10 amp maximum

Black Textured Plastic face plate with mounting hole locations.

• Specifications:
  
  Top Insert top power module for Desk, Conference or Training tables
  
  Duplex Power Module for desktops textured plastic face trim.
  
  Includes 2 USB A for charging. 5 VDC 2 Amp
  
  Maximum amp is 10 amp
  
  14-gauge cord.3 prong with ground. 6' length
  
  Textured face with Black finish with black cord.
  
  Fits:
  Tops 1" or thicker
  Opening cut is 5 5/16" x 1 15/16" (using a 1/4" router or jig saw)
  
  • Desking
  • Benching
  • Cubicles
  • Worksurfaces (1" thick or mores)
  
  Module face is:
  Textured flush mount
  
  Insert is:
  Textured Plastic Black Finish
  
  Face size is:
  
  6 5/16" (160mm) long
  2 1/8" (54mm) wide
  6 25/32" (172.2mm) deep
  
  Cut open require is 5 5/16" (135mm) x 1 15/16" (49mm) using a 1/4" diameter router bit.
  
  Two screw locations 5 1/4" on center (face mount).
  
  70" cord black molded 3 prong 14 gauge.
  
  ETL Listed
  
  
  
  

The trademarks, service marks or registered trademarks are those of their respective owners.

The parts on this site are made by or for OmniMax USA LLC.

OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.

These parts do not originate from the original OEM manufactures unless specifically identified as such.

Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.

Compatico® is a registered trademark of Compatico, Inc.

Friant® is a registered trademark of Friant Inc.

Open Plan Systems® and HMU® are registered trademarks of Open Plan Systems, Inc.

Unisource, Mirage® and Mirage VS® are registered trademarks of Unisource Office Furniture Parts, Inc.

All parts and products listed on this website originate from aftermarket manufacturers. Any reference to a specific manufacturer or trademark is only for the purposes of identify application for the part. No parts sold on this website originate from the original manufacturer.