18" x 60" Glass Acrylic Up Glass
Cubicles or Work tops, frameless
UP Glass for Panel or Worksurface applications
6mm Thick Acrylic material. With 3/8" radiused finish corners. Frameless
Clear Finish
18" H x 60" w (nominal dimensions).
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov
Specifications:
Frameless 18" h x 60" w
Requires glass clamp or other methods to hold the glass in place (sold seperately)
Acrylic Plastic sheet machined and finished to size.
Product features two mounting holes for use with our OMA-05 or OMA-01 glass clamps to locate the glass in a specific location
Holes are 4" from each end and 1" from the bottom of the glazing.
Mounting locations for one piece hanger frame and old style two piece frame and shell.
Please note: Reguires glass clamps or glass extrusion to mount, (Sold seperately)
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
-
Specifications:
Frameless 18" h x 60" w
Requires glass clamp or other methods to hold the glass in place (sold seperately)Acrylic Plastic sheet machined and finished to size.
Product features two mounting holes for use with our OMA-05 or OMA-01 glass clamps to locate the glass in a specific location
Holes are 4" from each end and 1" from the bottom of the glazing.
Mounting locations for one piece hanger frame and old style two piece frame and shell.
Please note: Reguires glass clamps or glass extrusion to mount, (Sold seperately)
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.For more info go to www.P65Warnings.ca.gov
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
18" x 60" Glass Acrylic Up Glass
Cubicles or Work tops, frameless
UP Glass for Panel or Worksurface applications
6mm Thick Acrylic material. With 3/8" radiused finish corners. Frameless
Clear Finish
18" H x 60" w (nominal dimensions).
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov
Specifications:
Frameless 18" h x 60" w
Requires glass clamp or other methods to hold the glass in place (sold seperately)
Acrylic Plastic sheet machined and finished to size.
Product features two mounting holes for use with our OMA-05 or OMA-01 glass clamps to locate the glass in a specific location
Holes are 4" from each end and 1" from the bottom of the glazing.
Mounting locations for one piece hanger frame and old style two piece frame and shell.
Please note: Reguires glass clamps or glass extrusion to mount, (Sold seperately)
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
