Home > AO2 PARTS > BRACKETS AND SUPPORT ARMS
Choose a sub category:
Paper Management
Sort By:
Page of 2
Wedge Block Panel Wedge Block for AO2 Panels

Panel wedge block for AO2 Panel

Designed for use with 2 piece hanger frame and panel shell system (pre-2000 product)

Use with our HMS04 Hanger frame and HMS03 Panel Shell

Not required for HMS03/04 Complex Hanger Frame

Black Finish

List Price: $1.24
Our Price: $0.78
Connector Wedge Block Connector Top Wedge Block for AO2 Connectors

Connector top wedge block for AO2 Connector

Designed for use with AO2 Connectors and Threaded plates (HMS05, not included)

5/16 x 18 threaded mounting wedge for AO2 connectors, requires draw block, threaded plate and bolts (not included, sold separately)

Black Finish

List Price: $1.60
Our Price: $1.00
Support Arm,a02 24 Cantilever, AO2. Pins and Buttons Set, Zinc

Cantilever Support Arm pin and button set

For use with AO2, SQA and similar type products.

Pins and Buttons for top alignment and drop on.

Standard Phillips style screw with pin and button for locating

Sold in set for one canteliever

ZI Zinc finish

List Price: $31.24
Our Price: $1.00
Glazing pin for use with Omnimax AO2 Stack Glass Glazing Pin

Glazing Pin for use with glass stack and door units.

Nylon barb pin

Natural Color

These parts are produced for Omnimax USA LLC and do not originate from the OEM suppliers. The reference to these suppliers is designed to assist in application only. The original manufacturers do not authorize or make any of these parts. OmniMax USA LLC is a independent aftermarket supplier or furniture component parts.


List Price: $1.00
Our Price: $1.00
Mending Plate Flat Plate, 2" x 3", 4 hole, Zinc

Flat Mounting Plate for top alignment and other installation details

2" x 3" with 4 mounting holes, steel

Zinc Finish

List Price: $1.76
Our Price: $1.10
Panel Glide for AO2 Metal Base Panel Glide, 2"

Leveling glide for Panel metal base, 2" length

Sold Ech

For use with AO2 or similar products.

BU Black Finish


These parts are produced for Omnimax USA LLC and do not originate from the OEM suppliers. The reference to these suppliers is designed to assist in application only. The original manufacturers do not authorize or make any of these parts. OmniMax USA LLC is a independent aftermarket supplier or furniture component parts.


List Price: $1.12
Our Price: $1.12
Coat Hook for panel systems Coat Hook Over Panel for 1 7/8 to 2 size Black

Coat hook Over Panel MountFor Use on 1 7/8" to 2" Panel (thickness)

Black Finish

List Price: $1.84
Our Price: $1.25
Wedge Block In line Panel In Line Rod Wedge Block for Drop Down AO2 Panels

Panel wedge block for AO2 Panel in Straight line drop down condition

Designed for use with one piece complex hanger frame and rod in a drop down condition (post-2000 product)

Use with our HMS03/04 One Piece Complex Hanger frame

Does not work with old style two piece hanger frame and panel shell

Black Finish

List Price: $2.16
Our Price: $1.35
Connector Bottom Wedge Block Connector Bottom Wedge Block for AO2 Connectors

Connector Bottom wedge block for AO2 Connector

Designed for use with AO2 Connectors and Threaded plates (HMS05, not included)

For AO2 connectors, requires threaded plate and bolts (not included, sold separately)

Black Finish

List Price: $2.28
Our Price: $1.43
Connector Rod Bottom Wedge Block Connector Rod Bottom Block for AO2 Rod

Connector Bottom block for AO2 Rod

Designed for use with AO2 Rods

Bottom Draw Block with threads for rod

Black Finish

List Price: $2.28
Our Price: $1.43
Connector Rod Top Wedge Block Connector Rod Top Block for AO2 Rod Connector

Connector Top block for AO2 Rod and Connectors

Designed for use with AO2 Rod and Connectors

Top Draw Block

Black Finish

List Price: $2.28
Our Price: $1.43
Mending Plate Flat Plate, 2" x 5", 8 hole, Black

Flat Mounting Plate for top alignment and other installation details

2" x 5" with 8 mounting holes, steel

Black Finish

List Price: $2.64
Our Price: $1.65
Cubicle paper management clip for AO2 Tool Bar Clip for Paper Management Rails 1 pair

Tool bar Mounting Clip for use with AO2 panels and paper management

Steel Clip for use with all sizes of Toolbars from Omnimax

PLEASE NOTE: This does not include the tool bar or paper management products (order separately

BU Black umber finish

Sold in pairs

List Price: $2.76
Our Price: $1.73
Shelf Bracket AO2 Pair Bracket Shelf Hanger Half Height Pair BU Black Umber

Half Height Shelf End BracketsSold in Pair

OEM Style bracket for use with AO2 or similar products.

BU Black Umber paint

These parts are produced for Omnimax USA LLC and do not originate from the OEM suppliers. The reference to these suppliers is designed to assist in application only. The original manufacturers do not authorize or make any of these parts. OmniMax USA LLC is a independent aftermarket supplier or furniture component parts.


List Price: $4.16
Our Price: $2.60
Corner Support Bracket AO2 Pair Bracket Corner Support, Pair OEM Style BU Black Umber

Corner Support bracket for CRT, L or other type of mid support.

Also good for front support edge as well

Sold in Pair

OEM Style bracket for use with AO2 or similar products.

BU Black Umber paint

These parts are produced for Omnimax USA LLC and do not originate from the OEM suppliers. The reference to these suppliers is designed to assist in application only. The original manufacturers do not authorize or make any of these parts. OmniMax USA LLC is a independent aftermarket supplier or furniture component parts.


List Price: $4.28
Our Price: $2.68
Shared bracket for HMS37 Cantilever, Shared Support Conversion Bracket for HMS37 Black

Cantilever Support Arm Conversion Bracket for HMS37

For use with Universal Cantilever HMS37.

Stamped Steel Bracket slides into slots on HMS37 to convert part to shared support

Order HMS37 separately (not included)

Sold Each

BU Black Umber paint

These parts are produced for Omnimax USA LLC and do not originate from the OEM suppliers. The reference to these suppliers is designed to assist in application only. The original manufacturers do not authorize or make any of these parts. OmniMax USA LLC is a independent aftermarket supplier or furniture component parts.


List Price: $4.88
Our Price: $3.05
Wall start Top Wedge Block Wall Start Top Wedge Block

Wall Start Top Wedge Block


Designed for use with AO2 Wall Starts (Anchors and Wall start parts, not included)

For AO2 wall start with lower wedge block and filler strip (not included, sold separately)

Black Finish

List Price: $4.92
Our Price: $3.08
Shelf Bracket AO2 Pair Bracket Shelf Hanger Full Height Pair BU Black Umber

Full Height Shelf End BracketsSold in Pair

OEM Style bracket for use with AO2 or similar products.

BU Black Umber paint

These parts are produced for Omnimax USA LLC and do not originate from the OEM suppliers. The reference to these suppliers is designed to assist in application only. The original manufacturers do not authorize or make any of these parts. OmniMax USA LLC is a independent aftermarket supplier or furniture component parts.


List Price: $5.08
Our Price: $3.18
Lateral file bracket AO2 hanging Bracket, Tack Board, Lateral File, Shelf Black

Bracket for Tack Board, Lateral File and Shelf Ends

10 1/2" long bracket with teardrop and screw mount locations

Black Finish

These parts are produced for Omnimax USA LLC and do not originate from the OEM suppliers. The reference to these suppliers is designed to assist in application only. The original manufacturers do not authorize or make any of these parts. OmniMax USA LLC is a independent aftermarket supplier or furniture component parts.


List Price: $5.24
Our Price: $3.28
Wall start Bottom Wedge Block Wall Start Bottom Wedge Block

Wall Start Bottom Wedge Block


Designed for use with AO2 Wall Starts (Anchors and Wall start parts, not included)

For AO2 wall start with top wedge block and filler strip (not included, sold separately)

Black Finish

List Price: $5.80
Our Price: $3.63
Coat Hook for panel systems Coat Hook, Panel slot mount, 1" on center, Black

Coat hook Universal Panel Mount For Use in Panel hanger frame slots.

Hooks are for 1" on center panel hanger frame

Black Finish

List Price: $8.16
Our Price: $3.75
Cord Manager for cubicles Cord Manager 4' Black Latch Style

Latch Style Plastic Cord Manager

48" Length

For use with cubicles, metal overheads and wood office furniture

BU Black Umber

Sold Each


List Price: $7.92
Our Price: $4.95
Counter top Mid Support Arm, AO2 Counter Top Support Bracket, Mid, MT

Counter Top Support Arm, for Mid application

For use with AO2, SQA and similar type products.

Use in mid panel run to support counter tops going one direction or use as a center support for a longer top

Cast arm

Requires mounting screws (not included)

Requires Rod and Block assembly (not included)

Sold in each

MT Medium Tone paint


List Price: $10.36
Our Price: $6.48
Counter top Mid Support Arm, AO2 Counter Top Support Bracket, Mid, BU

Counter Top Support Arm, for Mid application

For use with AO2, SQA and similar type products.

Use in mid panel run to support counter tops going one direction or use as a center support for a longer top

Cast arm

Requires mounting screws (not included)

Requires Rod and Block assembly (not included)

Sold in each

BU Black Umber paint


List Price: $10.36
Our Price: $6.48
Counter top Center Support Arm, AO2 Counter Top Support Bracket, Center, MT

Counter Top Support Arm, for Center application

For use with AO2, SQA and similar type products.

Use in mid panel run to support counter tops going to different directions or use as a center support for a longer top

Cast arm

Requires mounting screws (not included)

Requires Rod and Block assembly (not included)

Sold in each

MT Medium Tone paint


List Price: $11.16
Our Price: $6.98
Counter top Center Support Arm, AO2 Counter Top Support Bracket, Center, BU

Counter Top Support Arm, for Center application

For use with AO2, SQA and similar type products.

Use in mid panel run to support counter tops going to different directions or use as a center support for a longer top

Cast arm

Requires mounting screws (not included)

Requires Rod and Block assembly (not included)

Sold in each

BU Black Umber paint


List Price: $11.16
Our Price: $6.98
Counter top Mid End Support Arm, AO2 Counter Top Support Bracket, Mid End, BU

Counter Top Support Arm, for Mid End application

For use with AO2, SQA and similar type products.

Use in mid end panel run to support counter tops going one direction or use as a center support for a longer top

Cast arm

Requires mounting screws (not included)

Requires End Cap assembly (not included)

Sold in each

BU Black Umber paint


List Price: $12.72
Our Price: $7.95
Counter top Mid End Support Arm, AO2 Counter Top Support Bracket, Mid End, MT

Counter Top Support Arm, for Mid End application

For use with AO2, SQA and similar type products.

Use in mid end panel run to support counter tops going one direction or use as a center support for a longer top

Cast arm

Requires mounting screws (not included)

Requires End Cap assembly (not included)

Sold in each

MT Medium Tone paint


List Price: $12.72
Our Price: $7.95
Support Arm 24 Cantilever, Universal, Support Arm, 24" Top, BU Black Umber LH

Cantilever Support Arm, for 24" deep top

For use with AO2, Steelcase® Avenir® and 9000® and similar type products.

This set uses screws for top attachment (not included).

Stamped Steel Arm, dimensions are nominal, please see specifications for actual sizes.

Mounting teeth are straight into to panel hanger frame (no curve)

Sold in Right and Left Hand individual parts (Right hand is sold separately)

BU Black Umber paint

PLEASE NOTE: This product will not work with Haworth® products.

These parts are produced for Omnimax USA LLC and do not originate from the OEM suppliers. The reference to these suppliers is designed to assist in application only. The original manufacturers do not authorize or make any of these parts. OmniMax USA LLC is a independent aftermarket supplier or furniture component parts.

List Price: $15.68
Our Price: $9.80
Support Arm 24 Cantilever, Universal, Support Arm, 24" Top, BU Black Umber RH

Cantilever Support Arm, for 24" deep top

For use with AO2, Steelcase® Avenir® and 9000® and similar type products.

This set uses screws for top attachment (not included).

Stamped Steel Arm, dimensions are nominal, please see specifications for actual sizes.

Mounting teeth are straight into to panel hanger frame (no curve)

Sold in Right and Left Hand individual parts (Left hand is sold separately)

BU Black Umber paint

PLEASE NOTE: This product will not work with Haworth® products.

These parts are produced for Omnimax USA LLC and do not originate from the OEM suppliers. The reference to these suppliers is designed to assist in application only. The original manufacturers do not authorize or make any of these parts. OmniMax USA LLC is a independent aftermarket supplier or furniture component parts.

List Price: $15.68
Our Price: $9.80