Glazing Pin for use with glass stack and door units.
Nylon barb pin
Black Color
- Specifications:
Plastic glazing pin for use with open frames, door frame (side light) and old style G14xx and G18xx glass inserts.
Hole Diameter needed 3/16"
Shank is 0.175" (4.5mm)
Barb is 0.202" (5mm)
Length is 0.5" (12.5mm)
Head diameter is 0.436" (7/16" or 11.1mm)
Black Color
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
Unigroup®, Premise®, NVision® are all trademarks of Haworth Inc.
Avenir®, 9000®, Moveable Walls®, Answer® are all trademarks of Steelcase Inc.
|